Product Presentation:
Wheelchair lifts are lifts specifically designed and manufactured for people with disabilities. In order to facilitate the travel and sightseeing of the disabled, in communities, hospitals, schools, hotels, hotels, public places and other places. It can be used indoors or outdoors, with beautiful structure, safety and stability, and easy to use. It can be customized according to your requirements.
Wheelchair lifts are lifts specifically designed and manufactured for people with disabilities. In order to facilitate the travel and sightseeing of the disabled, in communities, hospitals, schools, hotels, hotels, public places and other places. It can be used indoors or outdoors, with beautiful structure, safety and stability, and easy to use. It can be customized according to your requirements.
Size Information:
Features:
| Platform height | 1-10m |
| Platform size | 1200x900mm or customized |
| Load | 250-300kg |
Features:
1. It can be used indoors or outdoors.
2. It is easy to install, no need a pit.
3. It runs stably without noise.
4. It can be customized according to your requirements.
5. It has two control method: button and remote control.
6. It has emergency descent device if power-off situation happens.
How To Use:
A. Before use:
1. The elevator lift has been inspected and debugged before leaving the factory, and all technical indicators have reached the design requirements. The user only needs to read this manual carefully and strictly follow the steps when using it.
2. Non-professionals are not allowed to adjust the hydraulic system, electrical control system and elevator structural parts.
3. When the elevator lift is installed and used for the first time, carefully check whether there is any abnormality in the hydraulic pressure, electrical appliances, and structural components, and debug it only when there is no abnormality. Perform the load test after 3 to 5 times of no-load. This step is also applicable after the elevator overhaul.
4. The elevator lift has a guiding structure, carefully check the verticality and parallelism of the guiding structure, and debug it only after confirming that the guiding structure is good. The elevator shall not be loaded during initial commissioning.
5. For elevator lifts that are out of service for a long time, sections 2 to 4 of this chapter should be implemented before use.
How To Use:
A. Before use:
1. The elevator lift has been inspected and debugged before leaving the factory, and all technical indicators have reached the design requirements. The user only needs to read this manual carefully and strictly follow the steps when using it.
2. Non-professionals are not allowed to adjust the hydraulic system, electrical control system and elevator structural parts.
3. When the elevator lift is installed and used for the first time, carefully check whether there is any abnormality in the hydraulic pressure, electrical appliances, and structural components, and debug it only when there is no abnormality. Perform the load test after 3 to 5 times of no-load. This step is also applicable after the elevator overhaul.
4. The elevator lift has a guiding structure, carefully check the verticality and parallelism of the guiding structure, and debug it only after confirming that the guiding structure is good. The elevator shall not be loaded during initial commissioning.
5. For elevator lifts that are out of service for a long time, sections 2 to 4 of this chapter should be implemented before use.
B. During use:
1. The operation of the elevator is designed as a fully automatic operation mode. Just click the corresponding button on the control box to realize the corresponding action, and the cabin will stop automatically when it reaches the corresponding floor. The realization of these functions is realized by electrical appliances such as AC contactors and limit switches.
2. No overloading.
C. After use (maintenance):
1. Whether there is abnormal noise in various parts. If so, it should be dealt with in time.
2. Clean the hydraulic pump after one year of operation of the elevator lift, and replace the severely worn rotating and transmission parts such as shaft pins.
3. After the elevator lift has been running for one year, check whether the control circuit and electrical appliances are corroded and rusted, and whether the joints of the circuit are loose, collapsed, rusted, etc. Find problems and deal with them in time.
4. Replace the hydraulic oil at least once every six months. If the frequency of use is high, replace the hydraulic oil once every three months.
1. The operation of the elevator is designed as a fully automatic operation mode. Just click the corresponding button on the control box to realize the corresponding action, and the cabin will stop automatically when it reaches the corresponding floor. The realization of these functions is realized by electrical appliances such as AC contactors and limit switches.
2. No overloading.
C. After use (maintenance):
1. Whether there is abnormal noise in various parts. If so, it should be dealt with in time.
2. Clean the hydraulic pump after one year of operation of the elevator lift, and replace the severely worn rotating and transmission parts such as shaft pins.
3. After the elevator lift has been running for one year, check whether the control circuit and electrical appliances are corroded and rusted, and whether the joints of the circuit are loose, collapsed, rusted, etc. Find problems and deal with them in time.
4. Replace the hydraulic oil at least once every six months. If the frequency of use is high, replace the hydraulic oil once every three months.
FAQ:
1. Is your product customized?
Yes, because the conditions are different, all products are customized depending on detail requirement! If you give us more details about our products, we will give you a very quick quote!
2. What's the information should I provide when inquiry?
The more detailed information you provide, the more accurate solution we can prepare for you! Such as the capacity, lift height, power source or other specials you give us will be more appreciated.
3. What is the minimum order quantity?
It is one set, and of course, the more the better.
4. Are you a manufacturer or a dealer?
We are a famous hydraulic lift manufacturer in China. You are welcome to have a visit to our factory.
1. Is your product customized?
Yes, because the conditions are different, all products are customized depending on detail requirement! If you give us more details about our products, we will give you a very quick quote!
2. What's the information should I provide when inquiry?
The more detailed information you provide, the more accurate solution we can prepare for you! Such as the capacity, lift height, power source or other specials you give us will be more appreciated.
3. What is the minimum order quantity?
It is one set, and of course, the more the better.
4. Are you a manufacturer or a dealer?
We are a famous hydraulic lift manufacturer in China. You are welcome to have a visit to our factory.