Inside Climbing Tower Crane Internal Climbing Tower Crane Outernal Climbing Tower Crane TC5513-8t
Tower Crane QTZ80(TC5513)
1. Max. Load: 6t
2. Jib length: 55m
3. Tip load: 1.3t
4. Free standing height: 45m
5. Max. height: 150m
6. Mast size: 1.83X1.83X2.5m
7. Lift motor power: 47.5KW
Tower Crane QTZ80(TC5513)
1. Max. Load: 6t
2. Jib length: 55m
3. Tip load: 1.3t
4. Free standing height: 45m
5. Max. height: 150m
6. Mast size: 1.83X1.83X2.5m
7. Lift motor power: 47.5KW
| parameter | QTZ80(TC5513) | ||
| Rated lifting moment | Kn. m | 800 | |
| Maximum lifting load | T | 6 | |
| Working radius | M | 2.5~6 | |
| Tip load | T | 1.3 | |
| Hoisting height | Independent type | M | 45 |
| Attached type | M | 150 | |
| Hoisting speed | 2 falls | m/min | 10/40/80 |
| 4 falls | m/min | 5/20/40 | |
| Trolleying speed | m/min | 22/44 | |
| slewing speed | r/min | 0.6 | |
| Climbing speed | m/min | 0.6 | |
| Structure self-weight | T | 45 | |
| Total installed capacity | Kw | 47.5 | |
| Balance weight | T | 14.6 | |
| Working temperature | º C | -20~40 | |
| Working voltage | V | 380+-5% | |
| Max. working wind pressure | n/m² | 250 | |
| Range m | 3-28.3 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 |
| Lifting capacity t | 3 | 2.92 | 2.80 | 2.69 | 2.60 | 2.51 | 2.42 | 2.34 | 2.26 | 2.19 |
| Range m | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 |
| Lifting capacity t | 2.12 | 2.05 | 2.0 | 1.93 | 1.88 | 1.82 | 1.77 | 1.72 | 1.68 | 1.63 |
| Range m | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | ||
| Lifting capacity t | 1.58 | 1.55 | 1.51 | 1.47 | 1.43 | 1.39 | 1.36 | 1.33 |
| Range m | 3-15.3 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 |
| Lifting capacity t | 6 | 5.73 | 5.36 | 5.04 | 4.74 | 4.48 | 4.24 | 4.03 | 3.83 |
| Range m | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 |
| Lifting capacity t | 3.65 | 3.48 | 3.33 | 3.18 | 3.05 | 2.93 | 2.81 | 2.71 | 2.61 |
| Range m | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 |
| Lifting capacity t | 2.51 | 2.42 | 2.34 | 2.26 | 2.18 | 2.11 | 2.04 | 1.98 | 1.92 |
| Range m | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 |
| Lifting capacity t | 1.86 | 1.81 | 1.75 | 1.70 | 1.65 | 1.61 | 1.56 | 1.52 | 1.48 |
| Range m | 51 | 52 | 53 | 54 | 55 | ||||
| Lifting capacity t | 1.44 | 1.40 | 1.37 | 1.33 | 1.30 |
| Mechanical load rate | Hoisting mechanism | M5 | ||||
| swing mechanism | M4 | |||||
| luffing mechanism | M4 | |||||
| Hoisting mechanism | electromotor | type | YZRDW250M1-4/8 | |||
| power(kW) | 30/30 | |||||
| Limiter of height | type | FKDX-G | ||||
| steel wire rope | type | 6X37-15-1770-I | ||||
| Max. Pulling force | 20000 | |||||
| falls | a=2 | a=4 | ||||
| Hoist speed(m/min) | 80.36 | 41.05 | 39.37 | 20.11 | ||
| Rated hoisting capacity(t) | 2 | 4 | 4 | 8 | ||
| Min. stable descending speed | m/min | ≤7 | ||||
| swing mechanism | electromotor | type | YZR132M2-6 | |||
| power(kW) | 3.7×2 | |||||
| speed(r/min) | 908 | |||||
| Reducer | type | XX4-100.180 | ||||
| ration | 180 | |||||
| Hydraulic clutch | type | YOX280A | ||||
| hinge pins of swiveling | modulus m | 12 | ||||
| tooth number z | 16 | |||||
| modification coefficient | +0.5 | |||||
| Swing speed | r/min | 0.64 | ||||
| Swiveling Bearing | Straight 4 point contact ball type bearings | type | 011·45·1400 | |||
| modulus m | 12 | |||||
| tooth number z | 131 | |||||
| Hydraulic jacking system | electromotor | type | Y132M-4B5 | |||
| power(kW) | 5.5 | |||||
| Oil cylinder rated working pressure | M pa | 25 | ||||
| Max lift force | t | 50 | ||||
| Cylinder stroke | mm | 1600 | ||||
| Mounting space | mm | 2070 | ||||
| Cylinder diameter | mm | φ160 | ||||
| oil cylinder piston rod diameter | mm | φ110 | ||||
| Climbing Speed | m/min | 0.4 | ||||
| luffing mechanism | electromotor | type | YDEJ132S-4/8 | |||
| power(kW) | 4.5/3 | |||||
| steel wire rope | type | 6×19-7.7-1550- | ||||
| Reducer | type | BL22-43-3.3 | ||||
| ration | 43 | |||||
| ranging speed | m/min | 44/22 | ||||