GB SERIES SEALED FREE MAINTENANCE VRLA AGM BATTERY
Voltage: 6V,12V
Capacity: 6V4Ah~6V12Ah,12V4Ah~300Ah
Designed floating service life: 8-10 years @ 25 °C/77 °F.

Summary for solar agm battery

CSBattery GB series lead acid batteries are designed to have a large amount of stored current discharged between charging sessions, with very heavy non-porous battery plates to withstand repeated major discharging and charging cycle. The CSBattery VRLA AGM battery uses a different chemistry for the plates active paste material, and a slightly stronger electrolyte than normal battery electrolyte, thus the GB range features 30% higher cyclic life with 10 years of float life when compared to the other standard Duration range.

Features and Advantages for sealed free maintenance lead acid battery
30% more cyclic life through innovation at the PAM additives
Long life expectancy of 10 years in floating condition
Thick flat plate with high Tin low Calcium alloy
Wide operating temperature range from -20 °C to 50°C
3% Low self-discharge rate
Very good deep cycle performance: up to 700 cycles @50% DOD
Excellent deep discharge recovery capability

 Construction for VRLA AGM battery
Positive plate - Thick high Sn low Ca grid with special paste
Negative plate - Balanced Pb-Ca grid for improved recombination efficiency
Separator - Advanced AGM separator for high pressure cell design
Electrolyte - Dilute high purity sulfuric acid
Battery container and cover -Fire resistance ABS, water proof
Pillar seal - Two layers epoxy resin seal
Relief valve - Complete with integrated flame arrestor

Applications for VRLA SMF battery
Electric Powered Vehicles, Golf Cars and Buggies, Wheel Chairs, Power Tools, Electric Powered Toys, Control System, Medical Equipments, UPS systems, Inverter systems, Servers, Telecom, Emergency systems, Security systems, and so on.

 Charging voltage and settings for Sealed MF VRLA AGM battery
l . Constant voltage charging is recommended
2. Recommended float charge voltage: 2.27V/cell @20~25°C
3. Float voltage temperature compensation: -3mV/°C/cel l
4. Float voltage range: 2.27 to 2.30 V/cell @ 20~25°C
5. Cyclic application charge voltage : 2.40 to 2.47 V/cell @ 20~25°C
6. Max. charge current allowable : 0.25C

 

Product specifications and models
----------------------------------------------------------

6V  SEALED FREE MAINTENANCE AGM BATTERY
Model	Nominal Voltage (V)	Capacity (Ah)	Dimension (mm)				Net Weight	Gross Weight	Terminal
			Length	Width	Height	Total Height	kgs	kgs
GB6-180	6	180/10HR	260	180	247	251	27.5	27.7	M8
GB6-180A	6	180/10HR	306	168	220	226	27	27.2	M8
GB6-200	6	200/10HR	260	180	247	251	29.5	29.7	M8
GB6-200A	6	200/10HR	323	178	224	229	29.5	29.7	M8
GB6-200D	6	200/20HR	306	168	220	222	30	30.3	M8
GB6-210D	6	210/20HR	260	180	247	249	29.5	29.8	M8
GB6-220D	6	220/20HR	306	168	220	222	31.5	31.8	M8
GB6-225D	6	225/20HR	243	187	275	275	30.5	30.8	M8
GB6-310D	6	310/20HR	295	178	346	366	46	46.5	M8
GB6-330D	6	330/20HR	295	178	354	360	46.6	47.1	M8
GB6-380D	6	380/20HR	295	178	404	410	55.3	55.8	M8
GB6-420D	6	420/20HR	295	178	404	410	56.8	57.3	M8

VRLA battery FEATURES AND BENEFITS

        Ø Long life and supper stability under high temp. environment        Ø Electrolyte immobilized as gel state, no leakage and no stratification.

        Ø Supper deep cycle life at high temperature                                     Ø Use supper-C additives:Deep discharge recovery capability

        Ø Supper PSOC cycling performance

CSBattery Product Structure 

Component	Positive plate	Negative plate	Containe r &Cover	Safety valve	Terminal	Separator	Electrolyte	Pillar seal
Features	Thick high Sn low Ca grid with Special paste	Balanced Pb-Ca grid for improved recombinati on efficiencv	Fire resistanc e ABS (UL94-V0octional)	Flame Si-Rubber and aging resistance	Female Copper lnsert	Advanced PVC /AGM separator for high pressure cell desbm	Silicon Gel	Two layers epoxy resin seal

        Ø Positive plate : Thick high Sn low Ca 3D flat pasted plate                Ø Negative plate : Balanced Pb-Ca grid and AM with Supper-C addtives
         Ø Separator : Imported Amer-sil PVC separator for Gel battery        Ø Electrolyte : nano GEL electrolyte                                                                   
         Ø Battery container and cover : ABS for higher temperature             Ø Pillar seal : 100% factory tested, proven two layers epoxy resin seal           
         Ø Relief valve : Complete with integrated flame arrestor

CSBattery Assembling

CSBattery Quality Control 

CSBattery Certifications

Ø  IEC 60896-21/22                 Ø  IEC 61427     Ø  ISO9001/14001/18001        Ø  Eurobat guide, long life     Ø  BS6290 part 4                       
Ø  GB/T 22473                          Ø  CE                  Ø  MH63727-UL

CSBattery Packing and Loading

CSBattery Projects

CSBattery Applications
Ø Electric Powered Vehicles          Ø Wheel Chairs           Ø BTS Stations           Ø Medical Equipment           Ø Solar and Wind           Ø Golf Cars and Buggies  
Ø Power Tools           Ø Control System           Ø UPS systems           Ø Emergency systems 

CSBattery Factory 
CSBattery ENERGY CO.,LIMITED is a professional manufacturer and exporter of environmental friendly Rechargeable  Deep Cycle AGM Sealed Lead Acid (SLA) Batteries, Solar GEL Batteries, Front Terminal Battery, High Temperature long life GEL battery, OPzV Battery, Car/Auto Batteries, Telecom Batteries, Lithium batteries and other Solar related products such as  Solar inverter, Solar charger controller, Solar panel and so on.

CSBattery Customers 

CSBattery FAQ
---------------------------------------------------

                Ø Q1. Can your battery be delivered by sea and air?

                A: Yes, our batteries can be delivered both by sea and by air. We have MSDS, test report for safe transport as non-dangerous products.

                Ø Q2. Can I put my logo on the battery?

                A: Yes, you can print your logo on our batteries when you order reach 20ft container quantity. If not, price will be negotiated.

                Ø Q3. Can I fast charge my battery?

                A: Fast charging is not recommended as ifs harmful for the battery.

                ØQ4. Can I do a partial replacement of my batteries?

                A: Partial battery replacement of lead acid battery banks is not recommended.

                Ø Q5. How about your delivery time usually?

                A: About 7 days for stock products, around 20 days for half container products, 30 days for 20ft full container products.

                Ø Q6. Are you a battery manufacturer, and do you produce the plate by yourself ?

                A: Yes, we are a professional battery manufacture in Guangdong Province, China. And we produce plates by ourselves.

                Ø Q7. What certificate your company have?

                A: ISO 9001, ISO 14001, OHSAS 18001, CE, UL, IEC 61427 test report, Patent for gel technology and other Chinese honor.

                Ø Q8.What is your warranty time for VRLA battery ?

                A: It depends on battery capacity, depth of discharge, and battery usage. Please kindly contact us for accurate information based on detailed requirements.
                Ø Q9. Why battery has different capacity at different hour rate?

                A: The capacity of a battery, in Ahs, is a dynamic number that is dependent on the discharge current. For example, a battery that is discharged at 10A will give you more capacity than a battery that is discharged at 100A. With the 20-hr rate, the battery is able to deliver more Ahs than with the 2-hr rate because the 20-hr rate uses a lower discharge current than the 2-hr rate.

                Ø Q10. What is the shelf life of VRLA battery and how to maintain the battery?

                A: The limiting factor of battery's shelf life is the rate of self-discharge which itself is temperature dependent. VRLA batteries will self-discharge less than 3% per month at 77° F (25° C). VRLA batteries should not be stored for more than 6 months at 77° F (25° C) without recharged. If in hot temperature, recharge it every 3 month. When batteries are taken out of long storage, it is recommended to recharge before use.
                Ø Q11. How does your factory control the quality?

                A: We Adopt ISO 9001 quality system to control the quality. We have Incoming Quality Control (IQC) department to test and confirm raw material meets high quality producing requirements, Production Quality Control (PQC) department contains The first Inspection, In-process quality control, acceptance inspection and full inspection, Outgoing Quality Control (OQC) department confirm no defective batteries come out from the factory.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Inquiry US And Choose Your Gift Now ^.^