Cerebral Palsy children quadriceps lower limb knee joint  training equipment

Application: 
It is suitable for the sufferers whose kneejoint action are obstructed to do anti-resistance force training of quadriceps femoris and knee joint traction and passive training for patients with limited knee motion.

Specification:
Name: Children's Quadriceps Training Chair
Model: SH-CGST
Dimension: 85 x 86 x 92cm
Height of the seat: 48cm
Width of the seat: 54cm
Width of the armrest: 52cm
Adjustment of the armrest back and forth: 0-10cm
Adjustment of the lifting bracket: 0-8cm
Adjustment of the the calf pad: 0-30cm
Adjustment of the handle: 0-17cm
the adjustable range of the telescopic rod is 0 to 15cm
the calf support swing angle: >=120°
The swing angle of the leg press bar is not less than 1200
Max loading weight for the seat: 100kg
Max loading weight for the backrest: 50kg
Block weight: 1kg each (4 pcs on each side, 8pcs in total)

Features:
1. The lifting support, calf pad, calf support and power handle of the training chair can be adjusted arbitrarily within the specified range.
2. The swing angle of the calf support can be adjusted by the weight support and the index plate.
3. The angle of the adjacent holes on the index plate is 20 °.
4. The training method can be adjusted cushion to choose sitting or horizontal.
5. the weight frame can be adjusted up and down.
6. the handld is covered by the High resilience sponge and also can be adjusted up and down.
7. the back cusion is made of high resilience sponge and covered with leather. 
8. the cusion for the keen joint is made of sponge with ties, which can be adjusted up and down.
9. There are total weights, 1kg of each. We can use 4 weights at most duiring training. It was fixed by Spring hoop, which is convenient for unload and download the weights. 

Instructions: 
1. According to the patient's body characteristics and training needs, adjust the lifting bracket, calf pad, and calf bracket to the appropriate position.
2. The calf pad adopts a pin structure, and the pin can be drawn out when needed. The calf pad can be turned 90° outwards. After the patient sits, the pin can be reset and fixed with a pin, which provides convenience for training with the front of the calf close to the calf pad.
3. When choosing horizontal training, simply pull the backrest and move the backrest forward and backward by the desired angle.
4. Swing angle adjustment of the calf support: pull out the spring pin 9 outward to disengage the pin from the index plate 8, turn the counterweight support 12 to the desired position, loosen the spring pin 9, and fully insert the pin into the index plate Just inside the hole.
5. The method of assembling and disassembling the counterweight, press both ends of the spring hoop 13 with your fingers to loosen it and slide it out of the hanging rod. After installing or removing the counterweight, fix the spring hoop in the same way.
6. During training, when the quadriceps muscle is weak and it is difficult to swing the leg press bar, the rehabilitation handle or accompanying person can properly increase the force on the power handle 10 to help the training.

Training method:
The patient sits on the seat cushion, his legs are vacated, the front or back of the lower leg is close to the lower leg cushion, and the strap is tightened at 2 speeds, and the angle of the weight support and the number of weights are adjusted according to the training needs, and the training can be performed.
1. Quadriceps muscle strength training: The patient sits on the quadriceps training chair, the slap nest is close to the edge of the chair, and the compression pad of the inner resistance bar is placed at the lower and middle 1/3 of the lower leg (adjustable height) , Add proper weight to the lateral resistance rod, and then extend the knee to the maximum (centripetal contraction), then slowly lower (centrifugal contraction), and repeat the muscle training in this way. The drag arm is adjustable, so that the resistance can be easily adjusted.
2. Knee motion range training: For knee flexion dysfunction, the above postures and resistance methods can be used. The difference between training is that the patient is not required to stretch the knee hard, but the patient is required to relax as much as possible. Knee joint traction to achieve the purpose of increasing the range of joint movement.

Our Service
1. Professional manufacturer. Welcome to visit our website: https://sunshinemedical.en.made-in-china.com/
2. OEM/ODM service is available:
1) Customized logo on the products
2) Re-design the package
3) Customized function or outlook of the prdoduct
4) Any your ideas on product are welcomed and we can help you to design and put it into production
3. High quality, trendy designs, reasonable & competitive price, fast lead time.
4. After-sale service:
1) All products will be strictly Quality Checked before packing
2) All products will be well packed before shipping
3) All our products have 1 year warranty.
5. Faster delivery:
Sample order will be delivered in 1-3 days , large quantity will be delivered in 5-12 days
6. Payment:
You can pay order via: T/T; Western Union & PayPal.
7. Shipping
We have close cooperations with DHL, TNT, UPS, FEDEX, EMS, China Air Post.
You also can choose your own shipping forwarder.